Charging
Important
•
Make sure the USB power source can deliver sufficient current, otherwise you may damage
the source.
• Do not use a USB port of a computer, keyboard or USB hub without a power adapter as the
current supplied by these ports is insufficient.
•
Use the included USB data cable or similar.
1. Connect one end of the USB cable to the charger and the other end to a suitable power source.
2. Place your Qi compatible device on the charger to begin charging. Refer to “Operating elements” for
information about charging status lights.
Troubleshooting
Problem
Possible cause
Solution
Mobile device
stopped charg-
ing.
One of the safety mechanisms
has been triggered.
Remove the condition that has caused a
protection mechanism to trigger. See section
“Technical data” for further information.
The charger is too hot and over
temperature protection has shut
the charger off.
Remove mobile device from the charger and
allow the charger cool down.
Mobile device
not charging.
Power source power output may
be too low (< 5 V/DC, 2 A output). Use a power source with a higher output.
Care and cleaning
• Disconnect the product from the power supply and allow to cool down before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product con-
forms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of
conformity in the available languages.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the envi
-
ronment.
Technical data
Input voltage/current .................... USB Type-C
TM
:
5 V/DC 2 A, 9 V/DC 2 A, 12 V/DC 1.67 A
Output voltage/current ................. Wireless: 5 V/DC 1 A, 9 V/DC 0.83 A, 9 V/DC 1.12 A, 9 V/DC 1.67 A
Output power ...............................max. 15 W
Charging standard .......................Qi
Charging efficiency
......................70 %
Transmission frequency...............110.256 kHz to 147.436 kHz
Transmission distance .................
≤8 mm
Protection .................................... over voltage, over current, over heat, foreign matter (e.g. coin)
Operating conditions ....................-10 to +45 °C, 30 – 75 % RH (non-condensing)
Storage conditions .......................-20 to +70 °C, 30 –75 % RH (non-condensing)
Cable ...........................................USB-A to USB-C
TM
data cable (1 m)
Dimensions (W x H x D) ..............69.3 x 137.3 x 10 mm
Weight .........................................148 g
Operating Instructions
VC-QI-15W
Wireless Charging Adaptor, Qi, 15W
Item No. 2330828
Intended use
This product is
a Qi-Certified
wireless charger with a
USB Type-C
TM
connection.
It is intended for indoor use only. Do not use it out-
doors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in short circuits, fires, electric shocks
or other hazards. Read the instructions carefully and
store them in a safe place. Make this product avail-
able to third parties only together with its operating
instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Charger
• USB cable (1 m)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instructions.
Always read this information carefully.
The Qi symbol indicates this is a
Qi-Certified device.
The product is only intended to be in-
stalled and used in dry indoor rooms; it
must not get damp or wet.
The arrow symbol indicates special in-
formation and advice on operation.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can dam-
age the product.
• Consult an expert when in doubt about the op-
eration, safety or connection of the appliance.
•
Maintenance, modifications and repairs must
only be completed by a technician or an author-
ised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our techni-
cal support service or other technical personnel.
b) Charger
• Do not use the charger outdoors or near heated
surfaces.
• If you have a pacemaker or other implanted de-
vice, consult your doctor or the manufacturer of
the implanted device before using the charger.
•
Risk of fire. When charging do not leave the
charger or charging device covered with fabric or
any other flammable material.
•
Risk of fire. Do not place any metal objects or
metallic labels on the charger.
• Do not place credit (magnetic) cards, magnetic
recording devices or other sensitive electronic
devices too close to the charger! There may be
loss of data or damage to sensitive instruments.
• Do not crush, scratch or puncture the charger.
• Never use the product immediately after it has
been brought from a cold room into a warm one.
The condensation generated could destroy the
product. Allow the product to reach room temper-
ature before connecting it and putting it to use.
This may take several hours.
• Never leave the product unattended during use.
• Make sure that the cable is not pinched, kinked
or damaged by sharp edges.
c) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
Operating elements
1
2
3
4
1 Wireless charging platform
2 Touch switch:
Light On/Off
3 Light:
Red: standby
Blue: charging
LED OFF: fully charged
4 USB Type-C
TM
input
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2330828_v3_0421_02_dh_mh_en
