Operation
Always turn off the desired device before connecting it to the USB port.
Make sure the connection is correct. If the product is not connected properly, it could overheat
or cause an electric shock or fire.
Make sure that your device meets the product’s power requirements (see technical data).
You can charge or operate two USB devices simultaneously using the product. How to connect
a single USB device is described below.
• Connect the switched-off USB device to the product.
• Connect the product to a common household power outlet. The power indicator on the product lights up
to indicate the product is operational.
• Your USB device is now charging. Should you wish to operate the USB device, you may turn it on now.
• Turn off the USB device before disconnecting the product from the power outlet.
• Unplug the product after use.
Care and Cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Input voltage ..........................................................100 – 240 V/AC
Input AC frequency ................................................50/60 Hz
Output voltage .......................................................5.0 V/DC
Output current ........................................................2x 2.4 A
Output power .........................................................24.0 W
Average active efficiency
.......................................85.8 %
Efficiency at low load (10%)
..................................84.2 %
No load power consumption ..................................0.10 W
Model identifier:
SPS-2400/2+WH
Commercial registration number:
HRB 3896
Manufacturer:
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Protection class .....................................................II
Operating conditions ..............................................0 to +40 ºC, 20 – 85 % RH (non-condensing)
Storage conditions .................................................-20 to +60 ºC, 10 – 90 % RH (non-condensing)
Dimensions (W x H x D) ........................................approx. 97 x 60 x 30 mm
Weight ...................................................................approx. 127 g
Operating Instructions
SPS-2400/2+WH USB POWER ADAPTER
Item No. 2266357
Intended Use
The product is designed to charge and operate up to two suitable USB devices. Power is supplied via a
normal household power outlet. The product features overload and short circuit protection mechanisms.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use
can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and prod-
uct names are trademarks of their respective owners. All rights reserved.
Delivery Content
• USB power adapter
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an
electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
This symbol indicates that the product meets the energy efficiency requirements for Class VI.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can dam-
age the product.
• Always turn off the connected device before connecting/disconnecting it.
• Disconnect the product from the power outlet and the USB device when it is not in use.
•
The product gets hot during use. Ensure sufficient ventilation and never cover the product
during use.
• Do not short-circuit the USB outputs.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. The plug-in power supply unit
also involves danger to life by electric shock! Allow the device to reach room temperature
before connecting and using it. This may take several hours.
• Connect the appliance to a wall socket that can be accessed easily.
• Never leave the product and the connected device unattended during use.
• Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• Consult an expert when in doubt about the operation, safety or connection of the appliance.
•
Maintenance, modifications and repairs must only be completed by a technician or an au
-
thorised repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2266357_v1_0920_02_mxs_m_en
