Operating elements
2 3 4 5 6 7 8
1
1 Strap
2 USB-A output (orange)
3 MicroUSB input
4
Battery status indicators
5 USB-C
TM
input / output (fast charging)
6 USB-A output (orange)
7 Solar charging indicator
8 Power button
Charging the power bank
a) Solar
The solar charging indicator will light when receiving solar power.
b) USB power supply
•
Using the supplied cable, connect the microUSB input to an external USB power supply such as a USB
power adapter.
•
The battery status indicators will light while charging.
Charging connected devices
You can charge up to 3 devices at the same time.
•
Connect your device to one of the following charging outputs:
USB-A
(2)
, USB-A
(6)
, USB-C
TM
(5)
.
•
Charging will start automatically when connected.
Do not expose the solar panel to sunlight when charging connected devices.
Battery status indicators
Press the power button to activate the battery status indicators.
LED indicators
1
2
3
4
Power level (%)
0 - 25
25 - 50
50 - 75
75 - 100
Care and cleaning
• To maximize the surface area for solar charging, keep the solar panel clean.
•
Disconnect the product from any peripherals or mains before each cleaning.
•
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the envi
-
ronment.
Technical data
Input voltage / current ..................... MicroUSB: 5 V/DC 2 A, 9 V/DC 2 A
USB-C
TM
: 5 V/DC 2 A, 9 V/DC 2 A
Solar panel: 5 V/DC max. 400 mA, 2 W*
*max. power at 80,000 lux
Battery
............................................ LiPo 3.7 V, 10000 mAh
Recharge cycles
............................. 500 times
Port(s)
Output
Power
2x USB-A
1x USB type-C
TM
Fast charging
5 V/DC 3 A
15 W
9 V/DC 2 A
18 W
12 V/DC 1.5 A
18 W
Protection ....................................... Overcharge, overdischarge, over temperature, short circuit, over volt-
age
Solar panel .....................................
monocrystalline
Operating/Storage conditions ......... 0 to +40 ºC, <80 % RH (non-condensing)
Dimensions (L x W x H) .................. 157 x 97 x 9.3 mm
Weight ............................................ 236 g
Operating Instructions
SL-100VC
Solar Power Bank
Item No. 2301185
Intended use
The product is a solar charging power bank with fast
charging. It can charge up to 3 devices at the same
time.
Contact with moisture must be avoided under all
circumstances.
For safety and approval purposes, you must not re
-
build and/or modify this product. If you use the prod
-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in short circuits, fires, electric shocks
or other hazards. Read the instructions carefully and
store them in a safe place. Make this product avail-
able to third parties only together with its operating
instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Main unit with strap
• MicroUSB to USB-A cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care
-
fully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
•
The device is not a toy. Keep it out of the reach
of children and pets.
•
Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, strong jolts, high humidity, moisture, flam
-
mable gases, steam and solvents.
•
Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
-
has been subjected to any serious transport-
related stresses.
•
Please handle the product carefully. Jolts, im
-
pacts or a fall even from a low height can dam-
age the product.
• Consult an expert when in doubt about the op-
eration, safety or connection of the appliance.
•
Maintenance, modifications and repairs must
only be completed by a technician or an author
-
ised repair centre.
•
If you have questions which remain unanswered
by these operating instructions, contact our tech
-
nical support service or other technical person-
nel.
b) Connected devices
•
Also observe the safety and operating instruc
-
tions of any other devices which are connected
to the product.
c) LiPo battery
•
The rechargeable battery is permanently built
into the product and cannot be replaced.
•
Never damage the rechargeable battery. Damag
-
ing the casing of the rechargeable battery might
cause an explosion or a fire! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA
type), the casing of the LiPo rechargeable bat
-
tery does not consist of a thin sheet but rather a
sensitive plastic film only.
• Never short-circuit the contacts of the recharge-
able battery. Do not throw the battery or the
product into fire. There is a danger of fire and
explosion!
•
Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery first.
•
Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a cer-
tain amount of heat is generated during charging.
Important
•
Do not solar charge the power bank
and any external devices at the same
time! This may result in damage due
to overheating.
•
Do not charge the power bank using
a USB port on your computer. The
current supplied by these ports may
not be sufficient, and may damage the
computer.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in
-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2301185_v1_1120_02_dh_m_en
