• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the device to reach room temperature before connecting and using it. This may
take several hours.
• Never leave the product and the connected device unattended during use.
• Consult an expert when in doubt about operation, safety or connection of the
device.
•
Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
Always turn off the desired device before connecting it to the USB port.
Make sure the connection is correct. If the product is not connected properly, it could
overheat or cause an electric shock or fire.
For safety reasons, use the original charging cable of your USB device.
Make sure that your device meets the product's power requirements (see technical
data).
Your device must feature Qualcomm
®
Quick Charge™ technology in order to use
the quick charge function.
• Connect the switched-off USB device to the product.
• Plug the product into your vehicle’s cigarette lighter. The power indicator on the product lights
up to indicate the product is operational.
• Your USB device is now charging. Should you wish to operate the USB device, you may
turn it on now.
• Turn off the USB device before disconnecting the product from the cigarette lighter socket.
• Unplug the product from the cigarette lighter socket after use.
You can operate the product while the engine is both on or off. But you should not
start the engine while the product is connected, since the cigarette lighter socket
disconnects during engine start (not necessarily applicable to all vehicle models). If
the engine is switched off, drawing current over a longer period of time will discharge
the vehicle battery.
Cleaning and care
• Unplug the product from the cigarette lighter before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Input voltage ................................. 12 – 24 V/DC
Output voltage/current .................. 9 – 12 V/DC, 1.5 A
6.5 – 9 V/DC, 2 A
3.6 – 6.5 V/DC, 3 A
5 V/DC, max. 2.4 A for iPad & iPhone
Operating conditions ..................... 0 to +40 °C, 10 – 95 % RH
Storage conditions ........................ -10 to +55 °C, 5 – 95 % RH
Dimensions (Ø x L) ....................... 28 x 51 mm
Weight .......................................... 18 g
Operating instructions
USB charger CQCP-3000
Item no. 1508315
Intended use
The product is designed to charge and operate USB devices in a vehicle. The product features
a smart chip with Qualcomm
®
Quick Charge™ 3.0 technology. This chip detects the required
charging voltage of the connected device. If necessary, the charging voltage will be increased
automatically, resulting in a shorter charging time. Power supply is via a car cigarette lighter
socket. The product features overload and short circuit protection mechanisms. Use the
product in dry indoor areas only.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• USB charger
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with a flash in a triangle indicates health risks e.g. due to electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Always turn off the connected device before connecting/disconnecting it.
• Unplug the product while it is not in use.
•
The product gets hot during use. Ensure sufficient ventilation and never cover the
product during use.
• Do not short-circuit the USB output.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1508315_V1_1216_02_IPL_m_en
