8. LED status display
LED indicator
Description
Green LED control
light (3) is flashing.
Measured value(s) are within the con-
figured limits of low and high alarm.
Red LED control
light (2) is flashing.
Memory is full.
Measured value(s) are exceeding
configured limits of low and high
alarm.
In mode “START UPON KEYPRESS”
or “STOP TIME” recording has been
terminated. (In order to start recording
again, re-configure data logger.)
In mode “START UPON KEYPRESS”,
data logger is ready to start recording.
(In order to start recording hold button
ENTER
(8) pressed for few seconds.)
Red LED control
light (2) is continu-
ously on.
Data logger is generating PDF report.
Green LED control
light is flashing
twice.
Configuration was successful.
Firmware has been updated success-
fully.
79