b) General setup and settings
• Use the supplied USB cable to connect the device to a power
source. When connected, the power indicator and the 3 LEDs
will flash one by one. A countdown from 30 will then be
displayed, after which the device is ready for use.
• Use the
and
buttons to switch between the timeline
and CO2/RH/TEMP. The trend chart displays the historical
records for any of the three parameters.
• To restore factory defaults, hold
for 4 seconds until there
is an audible beep.
• Press
to open the main menu. To select a function, press
the
/
button.
• Select
to switch between human and plant modes.
• Select to change the high/low alarms for human and
plant modes.
• Select
to switch between alarm and mute .
• Select
to switch between temperature units.
31
