VOLTCRAFT 23 57 10, Руководство по эксплуатации

Страница: 49 / 136

49
10. "USER SET" configuration menu
USER SET USER SET
USER SET USER SET USER SET
PROGRAM->
PROGRAM->
PROGRAM-> PROGRAM-> PROGRAM->
TEMP CUT OFF TEMP CUT OFF TEMP CUT OFF TEMP CUT OFF TEMP CUT OFF
ON 50C
ON 50C ON 50C ON 50C ON 50C
SAFETY TIMER SAFETY TIMER
SAFETY TIMER SAFETY TIMER
SAFETY TIMER
ON 180min
ON 180min
ON 180min ON 180min
ON 180min
v
Start/Enter
CAPACITY CUT OFF CAPACITY CUT OFF
CAPACITY CUT OFF CAPACITY CUT OFF
CAPACITY CUT OFF
ON 5000mAh
ON 5000mAh
ON 5000mAh ON 5000mAh
ON 5000mAh
KEY BEEP ON KEY BEEP ON KEY BEEP ON KEY BEEP ON KEY BEEP ON
BUZZER ON
BUZZER ON BUZZER ON BUZZER ON BUZZER ON
INPUT POWER LOW INPUT POWER LOW INPUT POWER LOW INPUT POWER LOW INPUT POWER LOW
CUT-OFF 10.0V
CUT-OFF 10.0V CUT-OFF 10.0V CUT-OFF 10.0V CUT-OFF 10.0V
BACK-LIGHT BACK-LIGHT
BACK-LIGHT BACK-LIGHT BACK-LIGHT
100%
100%
100% 100% 100%
INC
vu
DEC
INC
vu
DEC
INC
vu
DEC
INC
vu
DEC
INC
vu
DEC
t
v
s
INC
Batt Type/Stop
DEC
s
Select the option "USER SET" from the main
menu using the "Batt Type/Stop" key, confirm
with the "Start/Enter" key.
Does not apply to this charger model.
The safety timer starts automatically when
charging begins; it protects the battery from being
overloaded (or if the delta-U cut-off mechanism
cannot find a peak). Do not set the time to be
shorter than the anticipated charging time!
Set the maximum battery charge capacity here.
This also protects against overloading (or if the
delta-U cut-off is not working).
"KEY BEEP" can be used to switch the key press
sound on or off. "BUZZER" can be used to switch
the alarm signifying an error in charging or
changes in the charging process on or off.
This function monitors the voltage at the charger
input (e.g. for a 12V battery). If the voltage drops
below the configured value, the charging process
is stopped.
Adjust the background lighting brightness here.