47
Mode 13
Function
Logs data immediately and circularly.
Should you wish an additional stop mode you choose:
Logging stops after PDF report generation.
Setting
Select “CIRCULAR LOGGING” as “RECORD START CONDITION”.
Select “AFTER PDF CREATED” as “STOP STYLE”.
• For mode 1 to 13, you can apply an additional function to delay the logging start time. Enter minute(s) value in
“START DELAY MINUTES” during configuration setting.
b) LC display indication
• Some settings do not have any indication on LC display. In order to review settings, please refer to "g) Review
configuration settings" on page 44.
• If there is not any display indicator or once the data logger starts/stops recording, the latest measurement is shown
on display.
DL-260A: Current (mA) DL-250V: Voltage (V)
mA
V
Mode
Start mode
Stop mode
Remarks
1
no display indicator not applicable
When memory is full, red LED control light (2) is flashing.
2
no display indicator
Stop recording by holding button ENTER (7) pressed for
few seconds.
3
no display indicator no display
indicator
4
not applicable
When memory is full, red LED control light (2) is flashing.
Start recording by holding button ENTER (7) pressed for
few seconds.
5
Start and stop recording by holding button ENTER (7)
pressed for few seconds.
Содержание 2203098
Страница 111: ...111...