background image

VOLTACON Li2021 BATTERY 2.4KWH 48V User Manual

Voltacon Li2021 2.4KWH 48V Battery User Manual 

Dear customer, 

This is your Li2021 48V50Ah LFP battery battery for home energy storage system. 

We provide safe, well-designed and high-performance standard LFP battery pack 

for you. The battery pack is compact, easy to install, free of maintenance and 

used as the building block of energy storage system by assembling in parallel. 

It is widely applied in home applications, small commercial and industrial energy 

storage system as well as Telecom stations.  

This manual contains all the information necessary to install, use and 

maintain the LFP battery. We kindly ask you to read this manual carefully before 

using the product.  

This manual is meant for the installer and the user of the LFP battery. Only 

trained and qualified staff may install and perform maintenance on the LFP 

battery.  

The boundaries of its use, as described in this manual should be kept in 

mind. The LFP battery may not be used in medical or in aviation-related 

applications. The LFP battery may not be used for any purposes other than 

described  in  this  manual.  Using  the  LFP  battery  for  any  other  purpose  will  be 

considered  improper  use  and  will  void  the  warranty  of  the  product. 

Voltacon

 

cannot  be  held  responsible  for  any  damage  caused  by  improper,  incorrect  or 

unwise use of the product. Read and understand this manual completely before 

using the product. During the use of the product, user safety should always 

be  ensured,  so  installers,  users,  service  personnel  and  third  parties  can  safely 

use the LFP battery.  

This is the original manual, keep it in a safe location! Please consult

https://voltaconsolar.com 

        for the latest version of all manuals. 

VOLTACON UK LTD. 

Add: Burnsall Road Industrial Estate, CV5 6BU, Coventry, West Midlands. 

Website: https://voltaconsolar.com 

Tel: +44 2477 67 55 75

Содержание Li2021 48V50Ah LFP































Отзывы: