BEFORE STARTING
1. Always operate the cleaner with the dust container installed.
2. Fitting and Removal of the Hose Assembly: - To connect the hose to the suction inlet,
insert the hose until it clicks into position. Remove the hose from the suction inlet by
pushing the button on the coupling to disengage the securing lock and withdraw the
hose from the inlet.
3. Attach the telescopic tube to the hose bent end handle and to the floor nozzle.
4. Extend the power cord by holding the plug and insert the plug into the power outlet.
5. Press the foot pedal to rewind the power cord; with your hand guide the cord to prevent
it from striking you or any other objects.
6. Press the On/Off pedal to start and stop the vacuum cleaner.
7. Adjust the suction power by sliding the variable speed controller positioned on the top
of the vacuum cleaner or by adjusting the suction control slide on the hose bent handle.
GETTING THE BEST RESULTS
Hard floors:
Use the dual-purpose floor nozzle with the left pedal in position
(8). Use the Hard Floor Tool (10) on slate, tiled and highly polished timber floors.
Carpets:
Use the dual-purpose floor nozzle with the left pedal in position
(9). Use the Turbo Nozzle (11) to lift short carpet pile and for vacuuming stubborn
fluff and the picking up of pet hair.
Reduce the suction power for rugs and fabrics.
Upholstered furniture:
Use the upholstery nozzle.
Skirting boards, crevices, corners etc.:
Use the crevice nozzle.
5
11.
10.
1.
3.
5.
7.
2.
4.
6.
9.
8.
38215 Volta U4015F Vortex IFU_V3.indd 6
26/08/10 1:43 PM
