VOLTA Campus U4700, Инструкция по эксплуатации

Страница: 5 / 10

INSTRUCTIONS FOR USE
4.
REPLACING THE DUST BAG
Replace the dust bag as soon as the indicator
becomes fully illuminated, when the cleaner is
operating at maximum power and the nozzle is
raised from the floor.
1. Remove the hose and open the dust bag cover.
2. Holding the cardboard bag plate, remove the
dust bag from the holder.
3. Fit a new dust bag by inserting the cardboard
bag plate into the seating to the fullest extent
in the holder.
4. Adjust the bottom corners of the dust bag into
the dust bag compartment.
5. Adjust the upper part of the dust bag into the
dust bag compartment and close the lid.
Note: Replace the dust bag even if it is not full ( the
pores may be blocked ) Also replace after using carpet
cleaning powder.
Use only genuine replacement bags.
Dust bag Part Number: E53n.
➚
➚
Warning: On collection of proprietary carpet
conditioning powders, plaster / concrete dust, it is
recommended that the dust bag is changed.
Some of the preparations contain substances
which while left in the vacuum cleaner for
extended periods, could create damage. Many
air fresheners, household deodorants, sprays
and polishes contain highly inflammable gas
propellants. Because of this it is particularly
important that these products are used strictly
in accordance with the relevant manufacturers
instructions. It is essential that none of the above
products are sprayed directly into the vacuum
cleaner or any of the filters, hose assembly or dust
chamber.
Spares
New filters and dust bags can be obtained from
your Authorised Volta service provider. In the listing
enclosed with this cleaner.
Please specify the model of the cleaner on ordering
parts.