INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
VOLT
®
Articulator Cast Brass Integrated LED In-Ground
Well Light
VWL-510 Series
Place the luminaire into the PVC
tube. Pass the luminaire pigtail
through the PVC tube.
Strip both of the leads from the
luminaire pigtail. Using two wire
connectors (sold separately),
connect the leads from the luminaire
to the main low voltage supply cable
leads.
Wire Connection
Adjust Position of Light and Change Optics
2
Pigtail
Luminaire
PVC Tube
Wire Connector
Main Low Voltage
Supply Cable
Install the PVC tube with the
luminaire in the hole and fill the hole
with pea gravel or sand.
To Adjust Position of Light:
Loosen the knobs. Adjust the LED
housing to desired position. Tighten
the knobs, and place the luminaire
back into the PVC tube.
To Change Optics:
Loosen the knobs and remove the
LED housing from the holder.
Fill Pea Gravel or Sand
Remove Housing
3
4
Pea Gravel
or Sand
PVC Tube with
Luminaire
Luminaire
Grate
Knob
LED
Housing
Soil