INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
- 4 -
- 5 -
Install Fixture to Stake
3
Fixture
Ground
Soil
Stake
Set Screw
Luminaire
Rotate
Adjust Luminaire Direction
4
Set Screw
Solar Panel
Rotate
Adjust Solar Panels Direction
5
Install Stake
2
Board
Ground
Soil
Stake
VOLT
®
Solar Spotlight
VSAL-9002-BBZ
Determine the location for
mounting the stake. Hammer
the stake into the ground until
flange of stake is flush to grade.
To avoid damage to the stake,
place a board on top of the stake
while hammering.
Note: If the ground is hard and
the stake is difficult to install,
make a crosscut in the ground
using a flat shovel.
Thread the fixture on to the
stake. Hand tighten until snug.
Use the lock nut to aim it in the
direction you desire.
Loosen the set screw on the
fixture, then rotate to the
desired direction. Tighten the
set screw once the desired
direction is achieved.
Loosen the other set screw on the
panel to rotate the solar panel
to the desired direction. Tighten
the set screw once the desired
direction is achieved.