Volt VPL-1050-4-BBZ, Руководство по установке

Страница: 5 / 8

customersupport@voltlighting.com • 813.978.3700
- 5 -
Install Stake
4
Install Fixture Body to Stake
5
Determine the desired
location for mounting the
luminaire. Hammer the stake
into the ground until flange
of stake is flush to grade. To
avoid damage to the stake,
place a board on top of the
stake while hammering.
Note: If the ground is hard
and the stake is difficult to
install, make a crosscut in the
ground using a flat shovel.
Board
Ground
Soil
Stake
Pass supply wires through
the center hole of the
stake and thread the
stem onto the stake.
Hand tighten until snug.
Clear away area in ground
and lay supply wires into
wireway slots.
Ground
Stem
Supply Wires
Soil
Stake