w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
INSTALLATION INSTRUCTIONS
Install Face Cover
3
Push face cover back onto the
fixture body aligned with the gaps
in the fixture body. Once the face
cover is flush with the fixture body,
rotate the face cover until it stops
and locks into place.
Remove Face Cover
1
Rotate the face cover until it
stops and then lift the cover
straight off.
Note: The first time it may be
difficult because the fixture
has a very tight o-ring seal and
a grease sealant for moisture
protection.
Face Cover
Fixture Body
Rotate
Fixture
Body
- 5 -
- 4 -
Install Fixture Body
2
Fixture Body
Lock Screw
Wall Anchor
(optional)
Attach the fixture body to your
desired location and secure with lock
screws.
Note: Wall anchors may be required
for certain installation conditions
(e.g. Brick walls, Concrete Walls,
etc.). Mark on the wall using holes
on the fixture body to drill holes for
your wall anchors. Remove base and
drill proper holes in the wall, then
insert wall anchors.
Hole
Face
Cover
Wire Connections
4
Strip both leads from luminaire
pigtail. Using two wire connectors
(sold separately), connect leads
from luminaire to main supply cable
leads.
Fixture
Wire
Connector
Main Supply Cable
Pigtail
VOLT
®
Dojo Deck Light
VDL-6009-4-BBZ
