![background image](http://html.mh-extra.com/html/volt/val-1004-bbz/val-1004-bbz_installation-instructions_1046275003.webp)
INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
VOLT
®
Soft Splash LED Wall Wash light
Remove Threaded Top
Install Lamp
2
3
Unscrew the threaded top and
remove it from the luminaire.
Insert lamp with correct wattage and
type marked on luminaire label.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch lamp with
bare hands. Use soft cloth to handle
lamp.
NOTE: “Wafer” bi-pin LED lamp also can
be used for this luminaire.
Luminaire
Lamp
“Wafer” Bi-pin
LED Lamp
Threaded Top
Threaded Top
Socket
Thread the threaded top back onto
the luminaire and hand tighten until
snug.
Clear away area in ground at
wireway slot in top of stake. Align
the wireway slots on base and stake.
Lay luminaire pigtail into wireway
slots and screw luminaire into stake.
Tighten until snug to secure base.
Install Threaded Top
Install Luminaire to Stake
4
5
Luminaire
Luminaire
Stake
Pigtail
Wireway Slot
Wire Connection
6
Strip two leads from luminaire pigtail. Using two wire connectors (not
provided), connect leads from luminaire to main low voltage supply
cable leads.
Pigtail
Main Low Voltage
Supply Cable
Wire Connectors