[email protected] • 813.978.3700
- 7 -
Option 3: Tripod Mount
Wire Connection
1
Integrated Hub Top
Main Supply Wires
Fixture Wires
Connectors
Tripod Mount
Main Supply Wire
Main Supply Wire
Continuation
Insert the main supply wire continuation (if needed) and the main
supply wire up through the bottom of the tripod mount and strip the
ends of both sets of supply wires.
Attach the fixture wires and both sets of the main supply wires to their
correct connectors in the integrated hub top.
Once the wires are installed properly, thread the integrated hub top
back onto the tripod mount and hand tighten until snug.
Install Tripod Mount
2
Screw
Optional
Anchor
Tripod Mount
Washer
Place the tripod mount onto the
desired location and secure it
with the screws. Tighten with a
screwdriver. Nylon spacers are
required when installing on trees.