www.volt-equipment.com
A- Quick Connect (QC) Nozzle
B- Spray wand with QC coupling.
1. Pull the collar back on the QC
2. Push nozzle into place
3. Push the collar back into place
on the QC.
4. Pull on the nozzle to assure that
it is locked into place.
A- High pressure gun with male 3/8
male plug
B- High pressure hose with Quick
Connect (QC) fitting
1. Pull the collar back on the QC
2. Push hose into place
3. Push the collar back into place
on the QC.
4. Pull on the hose to assure that it
is locked into place.
The trigger gun traps high water pressure,
even when engine is stopped. Relieve trapped
water pressure in the pump, hose and trigger
gun by squeezing the trigger AFTER the
engine has completely stopped.
The water source must be turned off and ALL
pressure released from the system prior to
disconnecting the hose or changing the nozzle.
To disassemble the hose and nozzle, pull collar back and remove hose or nozzle.
Figure 1
Figure 2
004
Содержание PRO POWER VK3000P
Страница 16: ......