
[email protected] • 813.978.3700
Install Fixture Body to Stake
3
Fixture Body
Stake
Pigtail
Wireway Slot
Extension Pole
- 5 -
4
Wire Connection
Pigtail
Main Supply Cable
Wire Connectors
Clear away an area in the ground at
the wireway slot on top of the stake.
Lay the luminaire pigtail into the
wireway slot and screw the stem onto
the stake. If the assembly does not
look straight, adjust by pushing or
pulling on the stake only. Use a bubble
level against the side of extension pole
to make sure it is perpendicular to the
ground. Tighten until snug to secure
Strip both leads from the luminaire pigtail. Using two wire connectors
(sold separately), connect the leads from the luminaire to the main low
voltage supply cable leads.