INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
VOLT
®
Low Voltage Landscape Lighting
Path & Area Lights
Screw harp off socket assembly. Remove
harp and glass lens from socket assembly.
Remove Harp and Glass Lens
2
Harp
Glass Lens
Socket
Assembly
Install Stake
1
Determine desired location for mounting
luminaire. Hammer stake into ground until
flange of stake is flush to grade. To avoid
damage to stake, place a board on top of stake
while hammering.
NOTE: If ground is hard and stake is difficult to
install, make a crosscut in ground using a flat
shovel.
Board
Stake
Soil
Ground