Model DMTC22KW
Domestic Charger AC 22kW
17
3.6.
Space required
When installing the Charger, it is necessary to respect some minimum distances for
reasons of maintenance and safety. In the case of device variants with optional cable
support, consideration should be given to the need for additional space at the bottom
to hang the charging cable.
If several loaders are installed adjacent to each other, a distance of at least 200mm
between the equipment must be observed.
It is recommended to install the equipment at a height of 1.2 to 1.4 m (height of the
load socket). It is important to note that national regulations may limit this height.
4.
Installation
Before installation, make sure you have studied all related drawings and are familiar
with all installation procedures. Strictly carry out the following steps to ensure a safe
and functional installation of the equipment.
Depending on the device model, you may need to purchase the appropriate
installation materials for the desired installation location separately.
Proper installation is necessary and is outside the manufacturer's responsibility.
4.1. Rainwater Drainage
The Charger must only be installed in the vertical direction at an angle of 90º, and no
inclination is allowed. Otherwise, water drainage will not be possible and may result in
damage to the equipment.
