Davide e Luigi Volpi S.p.A.
Via San Rocco,10 – 46040 Casalromano (MN) – Italy
Tel. +39 0376.76009 - 76012 Fax. +39 0376.76408
E-mail: [email protected] – [email protected]
DAVIDE E LUIGI VOLPI S.p.A. - Via San Rocco,10 - 46040 CASALROMANO (MN) - ITALY YLB19VBE_2 Libretto d’uso V_BLACK ELEKTRON pag. 15 di 48
WARNING
:
Do not prepare the solution in the sprayer tank but always in a separate container.
Do not ever pour the solution into the tank without the use of the filter.
5.3.
POSITIONING OF THE SPRAYER
Put the sprayer on a flat surface at a useful height, in order to put the sprayer on your shoulders easily, with the belts previously
adjusted.
If you need to adjust the belts, put the sprayer on a flat and raised surface, remove your arms from the shoulder belts and adjust
the length through the buckles.
5.4.
SPRAYER START-UP
•
Switch on the sprayer through the switch A (Fig. “A”)
•
Activate the electronic pressure regulator B (Fig. “A”)
•
Move the lever on the handle to start spraying
•
Use the pressure regulator B (Fig. “A”) to set the desired working pressure
•
When releasing the handle lever, the pump stops automatically interrupting the spraying of the liquid
WARNING
:
Never let the sprayer work when the tank is empty.
WARNING
: Avoid discharging the battery completely; when the battery is getting low, you need a full recharge.
Completely recharge the battery before storing the sprayer for a long time.
5.5.
NOZZLE REGULATION
This sprayer is supplied with adjustable con nozzle 14 (Fig. “B”) and fan nozzle for weed control 15 (Fig. “B”).
Screwing or unscrewing the final part of the nozzle 14 (Fig. “B”), it is possible to adjust the diameter of the “rose” spray until
you get the “jet”.
5.6.
OPERATIONS TO BE CARRIED OUT AT TERMINATION OF WORK
When finishing work, pour the remaining liquid in a specific container and carefully rinse the internal of the tank and the hose
letting it flow through the lance with clean cold water.
Check that the water used for rinsing has completely come out.
Turn off the general on/off switch A (Fig. “A”).
After having cleaned the tank, remove, clean and reassemble the filters (items 5 and 6, Fig. “B”).
Unscrew the nozzle 14 (Fig. “B”) from the lance 12 (Fig. “B”); disassemble the nozzle and clean the two parts with clean
water, paying attention not to damage or loose the OR.
Clean the handle using a damp cloth without soaking it in water. Unscrew the nut 10B (Fig. “C”); remove the hose from its
holder; remove the hose holder with filter 10F (Fig. “B”) and wash it with clean water; then, reassemble all the parts.
Remove from the tank eventual materials or objects that could damage the sprayer.
Wear clothes and protective devices during these activities.
WARNING
: Do not disperse the rinsing water neither the remaining solution in the environment; it is recommended
to pour all these liquids in specific drains, suitable for water purification and drainage.
Always switch off the general switch A (Fig. “A”) after every use.
Keep the sprayer out of reach from children, protected from sunrays and cold temperatures and with completely charged
battery.
FAN NOZZLE 15 (FIG. “B”)
Pressure
(bar)
Litres /
min.
Battery operating
time (hours)
Litres for each
battery charge
3
1,22
3,6
260
1
0,82
9,0
440
Pressure adjustable through electronic regulator
ADJUSTABLE NOZZLE 14 (FIG. “B”)
Pressure
(bar)
Litres /
min.
Battery operating
time (hours)
Litres for each
battery charge
5
0,74
3,2
140
3
1,20
3,6
250
Pressure adjustable through the nozzle
