8
Frozen Beverage Granita Machines Operator’s Manual
5. Reassemble the magnetic rotor assembly and then the auger.
6. Replace the bowl by pushing it toward the back wall, making
sure it fits properly onto the gasket. The locking lever will be
lowered until it rests on the drip tray surface.
7. Rinse using a cool beverage in order to eliminate any
remaining sanitizing solution from the bottom of the
containers. Dry the inside of the containers with a disposable
paper towel.
8. For cold drink dispensing or cleaning, install the Cold Drink
Restrictor. To install it remove the condensation ring, clip the
cold drink restrictor on the end of the spigot. To remove or
disassemble, place your thumb on the cold drink restrictor tab
and lightly pull down to remove.
