Vollrath 4634010, Руководство оператора, Страница: 7 / 16

B
uffet and
t
aBletop
S
ervice
7
ENGLISH
O
peratOr
’
s
M
anual
o
Peration
, d
roP
-i
n
c
hafer
This equipment is designed to heat with an electric chafer heater only .
WARNING
Burn Hazard.
Do not touch heating surfaces, liquid, or while unit
is heating or operating. Hot food, surfaces, steam
and liquids can burn skin. Use gloves, mitts or
pot holders if it is necessary to handle hot pans,
plates and equipment.
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the heater. Liquid inside the heater could
cause an electrical shock. Do not damaged power
cord.
C
C
E
A
B
D
F
Figure 7. Drop-In Chafer Features and Controls.
A
COVER HANDLE. Used to open and close the cover.
B
COVER. Covers the food/beverage product.
C
HINGE. Allows the cover to rotate.
D
FOOD PAN. Holds the food product.
E
WATER PAN. Holds the water.
F
HEATER/FUEL TRAY. Holds the electric chafer heater.
1. Remove the food pan (D) from the water pan (E) ). See Figures 7.
2. Pour about 2 quarts (2 L) of clean fresh water into the water pan (E).
NOTE:
Follow the manufacture’s instructions for usage and safety for the
electric chafer heater .
3. Put the cover (B) in the closed position. Preheat the water by using a
universal electric chafer heater on “HI” for 30 minutes.
4. Open the cover (B).
5. Place the food pan (D) containing food product that is already at proper
serving temperatures into the water pan (E). Close the cover (B).
NOTE:
Monitor food temperature closely for food safety. The United States
Public Health Service recommends that hot food be held at a minimum
of 140 ºF (60 ºC) to help prevent bacteria growth.
6. Regularly check the food temperature.
7. If necessary adjust the electric chafer heater between “HI” and “LO” to
maintain correct food temperature.
8. When finished with the equipment turn the electric chafer heater to the
“OFF” position and unplug.
9. Open the cover (B). Remove the food pan (D). When removing hot food
containers from unit use gloves, mitts or pot holders to protect hands.
See Figures 6.
10. Allow ample time for the water to cool. Remove the water pan (E) and
dispose of water.
c
leaning
, t
abletoP
h
ot
f
ood and
b
everage
To maintain the appearance and increase the service life, clean your
equipment daily.
1. Unplug the electric chafer heater and let it completely cool.
2. Remove the heating source.
3. Wipe the unit exterior with a clean damp cloth.
4. Do not use abrasive materials, scratching cleansers or scouring pad to
clean the unit. These can damage the finish.
5. Thoroughly wipe off any mild soap or chemical cleaners. Residue could
corrode the surface of the unit.