C
ountertop
C
ooking
e
quipment
O
peratOr
’
s
M
anual
4
t
roUbleShooting
t
roubleshooting
C
hart
Problem
It might be caused by
Course of Action
Pilot Light does not come on when the temperature
control is turned up.
The equipment is not plugged in.
Plug equipment in.
Pilot Light malfunction.
Replace Pilot Light.
Thermostat Control malfunction.
Replace Thermostat Control.
The light comes on, equipment does not heat.
Heating Element malfunction.
Replace Heating Element.
S
ervice
and
r
epair
There are no user serviceable parts within this appliance. To avoid serious injury or damage, never attempt to repair the equipment or replace a damaged power
cord yourself. Do not send equipment directly to the Vollrath Company. Please contact the qualified professional repair service listed below.
VOLLRATH Technical Service • 1-800-628-0832
D
E
A
B
C
Figure 4. Oven Door removal and Installation.
9. Carefully set the oven door (B) into the oven (A). Place the arm (D) so
that it sets under pin (C). See Figure 3.
10. Rotate the hinge lock (E) off the hinge arm (D) as shown. Repeat on
both sides. See Figure 2.
11. Carefully open and close the door to verify that it is operating correctly.
If not repeat steps 9 and 10.
D
E
A
B
C
Figure 3. Oven Door and Hinge Lock (up or locked position).
5. Tilt the oven door (B) up slightly and lift the oven door out.
6. Door (B) may be cleaned.
7. Using a damp cloth, sponge dipped in soapy water to clean the door (B).
8. Use towels to completely dry the door (B) or allow it to air dry completely.