7
1 Turn the cold water off by shutting off the cold water faucet
NOTE:
To help prevent water spray when disconnecting hoses, you can
relieve pressure in the water line by momentarily starting your
washing machine
NOTE:
To ease hose installation and prevent cross threading, connect hose
prior to mounting unit on wall
NOTE:
Remove the two black caps from the hose connections
before installing hoses
2 Remove the cold water hose from the cold water inlet
on the back of your washing machine Leave hot water
hose attached
When connecting hoses to your LaundryPure 2 0 start by hand tightening the hose
connector(s) Using adjustable pliers, finish tightening hose connector(s) Do not
remove or disconnect the hot water line from your washing machine or water valve
CAUTION:
1 Return the LaundryPure 2 0 cover to its original position, fitting the bottom
in place and tipping upward
2 Secure with two (2) screws (not shown) along the top edge
3 Put the two (2) remaining screws along the bottom edge and tighten
REINSTALL THE COVER
HOSE INSTALLATION
Screws
Screws
