42.VW.2210.2554_BA_V02_EN
VAS 6923A
13
EN | Operation
Operation
This section provides information about the following activities:
•
Checking the power supply connection
•
Startup
•
Starting charging
•
Finishing charging
•
Cleaning
•
Disposal
•
Maintenance
Preparing the power supply connection
WARNING
Danger of fatal electric shock!
The electrical voltage in electrical installations is lethal and can cause death by electric
shock!
Unprofessional and faulty electrical installations may result in short circuits and cable
fires!
•
Use only electrical installations that comply with the national guidelines for the
installation of low-voltage systems!
•
Connect the product only to grounded electrical installations with protective
conductors!
•
Do not use extension cables and use only adapters approved by the manufacturer to
connect the product to the power supply!
A safe and suitable power supply connection that complies with the applicable standards is
required to ensure that the traction battery can be charged safely.
The following illustration of a power supply connection is provided as an example and may
differ from your particular situation. This has no effect on the steps to be performed.
(1)
Miniature circuit breakers
(2)
Three-phase power supply connection
(3)
Residual-current device (RCD)
