25
8.5 Select saved caller number
Telephone numbers saved in the radio can be dialled directly using the
...
buttons.
−
To be able to select a saved telephone number, press the button
and then the corresponding
button
...
that the desired telephone number has been assigned to. The telephone number
saved is shown in the display.
−
If this is the desired telephone number, confirm the selection by pressing the button
. The
connection is established.
−
If this is not the desired telephone number, press another button
...
until the desired
telephone number is shown in the display. Confirm the selection by pressing the
button. The
connection is established.
8.6 Setting the playback volume of the hands-free system
Calls performed via the hands-free system are played using the saved volume via the vehicles
loudspeakers. The setting can be changed as follows:
−
Keep the
button pressed until the setting menu (SET ONVOL) appears in the display. Keep
pressing the
button
briefly
until "BT VOL" is shown on the display. Turn the control knob
to set
the volume. Press the
button to confirm the new settings.
During the call, the volume can be adjusted at any time using the control knob
.
8.7 Bluetooth
®
Audio (Audio streaming)
With the Wireless communication interface "Bluetooth
®
Audio", the music that has been saved in your
telephone is played back via the radio.
To be able to use the "Bluetooth
®
Audio", the minimum prerequisite is that your mobile telephone must
support the Bluetooth
®
-Profile "Advanced Audio Distribution Profile" (A2DP). A2DP is used for wireless
transferring of Stereo-Audio-Signals in a high quality.
You can activate or deactivate the Bluetooth
®
Audio function in the settings menu.
−
Keep the
button pressed until the setting menu (SET ONVOL) appears in the display. Keep
pressing the
button
briefly
until "BT AUDIO ON" or "BT AUDIO OFF" is shown on the display. Turn
the control knob
for activating or deactivating the Bluetooth
®
Audio function.
If a music track is started from a coupled mobile telephone, the playback is performed via the vehicle
speakers. "BT AUDIO ST" is shown in the display and the
symbol flashes.
The audio functions can be set during the playback, as described in section 3.4.
The functions playback and pause must be operated from the keypad of the mobile telephone. Using
the
and
buttons of the radio, the fast forwards and backwards skipping can be operated.
When an incoming call is received, the music playback is interrupted for the period of the call and
continued after ending the call.
Note
●
The Bluetooth
®
Audio function of many mobile telephones is not supported at all or has limited
support. A list of the mobile telephones supported can be found in internet under the homepage:
www.volkswagen-zubehoer.de
1 INF
6 II
1 INF
6 II
1 INF
6 II
1
1
1
26
9
Anti-theft coding
The anti-theft coding prevents the reactivation of the device electronically when the it is removed by
unauthorised persons.
If SAFE appears in the display for approx. 10 seconds immediately after turning on the device and the
1000 permanently, you have to enter the code number corresponding to the device to deactivate the
electronic lock.
Enter the code number
Turn the device on. SAFE appears in the display. "1000" appears in the display after three seconds.
Using each of the buttons
...
, a decimal place of the four digit code number has been set.
The first digit of the code number is set using the button
, the second digit with the button
,
etc.
If you have completed the entry correctly, keep the
button pressed until the code acceptance has
been confirmed by an acoustic signal. Then the device is ready for operation.
Device card
The code number is printed on a device card together with the serial number that you will find in the
scope of supply. The card must be kept in a safe place. Never leave it in the vehicle. The device is only
useful for thieves if they also have the card!
Incorrect code number
If the incorrect code number is entered when unblocking the electronic lock, first SAFE appears flashing
in the display and then "1000" once again. Now the complete procedure can be repeated again. The
number of attempts is shown to the left in the display. If an incorrect code number is entered again, the
device is blocked for approx. one hour. This means that it cannot be put into operation. This block can be
recognised as SAFE and a small 2 to the left are shown permanently in the display. After one hour – the
device must remain switched on – the display goes out and you are able to unblock the electronic lock,
as previously described, once again. The cycle – two attempts, blocked for one hour – still applies.
Note
●
If the card with code number has been lost, please contact your Volkswagen partner.
1 INF
4 F+
1 INF
2 RPT
