27
Seats in passenger compartment
The three-seat bench in the first seat row of the
passenger compartment is split into a 1/3 seat
and a 2/3 seat. The bench is permanently
screwed to the floor and cannot be removed.
The backrests of each seat section can be folded
forward separately and lock into a horizontal
position. If the seat section fastenings on the
vehicle floor are unlocked, you can fold the
folded seats forwards again, i.e. tip them.
This can be done without removing the head
restraints. Gas-filled springs make tipping the
seats easy.
The seat sections can be secured in position with
folding struts so that they do not move on the
road.
S328_148
S328_150
1st row of seats in passenger compartment -
individual seat tipped
1st row of seats in passenger compartment -
tipped completely
S328_032
2nd row of seats in passenger compartment -
folded
Strut
Gas-filled
struts
Screw fastening
Strut
Loop
for releasing
backrest
Floor latch
Loop for
folding
Loop for unlocking
on vehicle floor
The double seat bench for the second row of
seats is fixed to the floor with 4 bolts.
The top left loop is used to unlock the backrest,
which can then be folded forward.
Pulling the two bottom loops releases the
fastening of the seat bench to the vehicle floor so
you can take the seat out from the rear of the
vehicle.
