housing retainer, seal, thermostat housing, O-ring and combination
valve from cylinder head.
3) Remove lower intake manifold bolts, both upper and lower
seals, and lower intake manifold. Remove cylinder head bolts in
reverse order of installation. See Fig. 7. Replace cylinder head bolt
after loosening or removing.
Fig. 5: Identifying 2.8L VR6 Cylinder Head (Golf & Jetta - AFP
Engine)
Courtesy of Volkswagen United States, Inc.
Inspection
Thoroughly clean all gasket mating surfaces. Check cylinder
head for warpage. Maximum warpage is .004" (.10 mm). Check minimum
cylinder head height and replace cylinder head (if necessary). See
