3
PAIRING WITH BLUETOOTH DEVICES
Your speaker must be paired to a Bluetooth device before it can be used. It is only
necessary to pair your speaker once with each device.
1. Press and hold the Power Button for about 3 seconds until the blue LED light
turns on and starts flashing.
2. Cycle to Bluetooth mode by pressing the
M
Mode Button, the speaker will beep
twice, this means that the speaker is ready to pair with your Bluetooth playback
device.
Pairing a second Mamba Speaker / Daisy Chaining:
3. The Volkano Mamba Speakers needs to pair to each other before connecting to
your Bluetooth device.
4. Once the speakers are in Bluetooth Mode press and hold the Play / Pause and
FM Auto Scan Button for 3 seconds on one of your speakers, this will pair your two
speakers together, a connection tone will be audible once both speakers are paired.
It is only necessary to pair your speakers with each other once.
5. Activate the Bluetooth on your playback device and search for “Mamba”. Select
“Mamba” from the device’s list to connect. You will hear a connection tone after
the speaker has been paired successfully and the Bluetooth LED will start flashing
slower.
6. You can now playback audio through the speaker.
7. Music tracks can be selected either on the speaker or on your playback device
(smartphone, computer, tablet etc.). Press the
/
V+
Next Track / Volume Up
Button to skip to the next song. Press the
V– /
Previous Track / Volume Down
Button to play the previous song.
8. Volume can be controlled either on the speaker or on your playback device
(smartphone, computer, tablet etc.). Press and hold the
/
V+
Next Track /
Volume Up Button or the
V– /
Previous Track / Volume Down Button on the
speaker to adjust the volume as preferred.
9. Press the Button on the speaker to play or stop music.
