Ensure that the surface of the windshield or dashboard is clean
before attaching the suction mount. The extendable arm can be
positioned to suit the angle you need. Adjust the tilt by loosening
the screw found at the base of the extendable arm and them moving
it to your desired angle. Tighten the screw to lock it into position.
Remove the protective film beneath the suction mount, then attach
the dashboard / windshield suction mount to your dashboard or
windshield. Please ensure that the suction mount is securely fixed
by pushing the suction lock lever down before proceeding.
Proceed to secure the lock to fix the magnetic mount plate to your
desired position.
Place a metal plate inside your phone cover (not supplied) then
place your phone over the phone holder’s magnetic surface. For
a more secure placement of the metal plates directly onto the
back surface of your phone, a 3M double-sided adhesive sheet is
provided.
• The product should only be used with the parts provided by
the manufacturer.
• This product is intended for vehicle interior use only.
• The phone holder is intended for personal use only. Commercial
use invalidates the warranty and the supplier cannot be held
responsible for injury or damage caused when using the device
for any other purpose than that which it was intended for.
SETUP
PHONE SETUP
SAFETY PRECAUTIONS
4
Содержание Hold Series
Страница 8: ......
