9. WARRANTY
Volfoni Group reserves the right to make changes in the hardware,
packaging or other documentation without prior written notice.
The EDGE™ Universal glasses are a trademark of Volfoni Group. All
trademarks are the property of their respective companies.
The EDGE™ Universal glasses are warrantied. Please refer to your
order form to be aware of the warranty terms.
The system should be returned in it original box with original proof of
purchase. Volfoni does not warrant uninterrupted or error-free
operation of the product.
11. MORE INFORMATION AND CONTACTS
For more information, please contact Volfoni.
www.volfoni.com
Distributed in France by VOLFONI SAS
29 rue Jean Jacques Rousseau 75001 Paris, France
Distributed in Americas by VOLFONI Inc.
3450, Cahuenga Bd West, Unit 504, Los Angeles, CA90068, USA
Distributed in Germany by VOLFONI GmbH
Erzgießereistraße 38, 80335 München, GERMANY
Distributed in Spain by VOLFONI Iberia, S.L.
4, Ronda Guglielmo Marconi, 46980 Paterna (Valencia), Spain
Distributed in China by VOLFONI Ltd
2101, Tower One, Lippo Center, 89, Queensway, Hong Kong
5. SOFTWARE UPDATES
Before using the EDGE™ Universal glasses, make sure you have
the latest version of software from our website.
For this purpose, please download the « Volfoni Loader » software
(http://www.volfoni.com/en/services-support/download) and
connect your glasses to your computer. Then start the software
and follow the instructions below.
- choose the menu “SUPPORT”
- choose “Upgradable Software”
- download the application “VOLFONI LOADER”
- connect your computer to the µUSB connector on the arm of
the EDGE™ RF with the USB/µUSB cable
- press and hold the ON/OFF button of the EDGE™ Universal
during 3 seconds.
- the LED of the EDGE™ Universal will light red
- verify that the application recognizes your system
- once you are connected, press the button “Check for updates”
- download the lastest version
8. IMPORTANT SAFETY RECOMMENDATIONS
-If you are unsure about your vision, take a test to verify your
ability to see stereoscopic 3D images.
-Do not sit too close to the screen when watching 3D images.
-Watching 3D may cause discomfort (such as eye strain, altered
vision, fatigue, nausea, lightheadedness, dizziness, confusion, loss
of awareness, convulsions, cramps and/or disorientation) for
some people.
Volfoni recommends that you take regular breaks when
watching 3D content or playing 3D video games until the
discomfort ends. If the discomfort persists, consult a doctor.
-Certain types of TV images or video games that contain flashing
patterns of light may cause epilepsy symptoms for some viewers.
If you or any member of your family has a history of epilepsy,
Volfoni strongly recommends that you consult a physician before
the use of this product.
-Be aware of young children, especially those under six years old.
Because their vision is still under development, consult a doctor
(such as a pediatrician or eye doctor) before allowing young
children to watch 3D. Not for children’s use without proper adult
supervision.
-If the product is broken, please keep broken pieces away from
mouth and eyes. Dispose of pieces responsibly.
-Protect the 3D system from direct sunlight, heat, or water.
Extreme conditions may alter the product's abilities.
-Do not drop or modify the electrical or mechanical components
of the 3D system.
-Do not apply force to the product.
4. USING YOUR EDGE
TM
UNIVERSAL
4.1 ON/OFF and Auto OFF
ON :
Turn the glasses ON with just a short press of the ON/OFF button.
When switched ON, the lenses will alternately flash one time (left
and right) to indicate to the user that the glasses are powered
ON.
OFF :
Turning the glasses OFF is possible by holding down the ON/OFF
the button.
The glasses will turn off automatically in the following cases:
- No movement of the glasses after 5 minutes.
- Loss of IR synchronization after 10 minutes.
4.2 Switch button
EDGE
TM
Universal has a switch button with 3 positions
- Position A : 3D mode*
- Position B : Dual view player A*
- Position C : Dual view player B*
*By default
4.3 Battery
The EDGE Universal battery life is about 45H
4.3.1 Battery Level
When starting up the glasses and with a short press of the
button, the glasses will show the level of battery life by the
number of flashes of the LED:
- Low level (less than 30%): one flash
- Intermediate level (between 30 and 90%): two flashes
- High level (greater than 90%): three flashes
4.3.2 Battery Charge
The battery charging will be indicated by the LED when the USB
cable is connected:
9
10
11
6
7
8
10. REGULATIONS
European Union - Disposal information :
This symbol means that according to local laws and regulations
your product should be disposed of separately from household
waste. When this product reaches the end of its life, take it to a
collection point designated by local authorities. Some collection
points accept products for free. The separate collection and
recycling of your product at the time of disposal will help
conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment.
- This Class B digital apparatus complies with Canadian ICES-003.
FCC Compliance Statement :
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interferences that may cause
undesired operation.
CE Certification
This device complies with CE Certification.
Electrical Safety (IEC 60950-1)
This device complies with IEC 60950-1
SOLUTION
Check that there is no other IR source
within a range of 30 meters around the 3D
system set-up.
Check that your original source is
broadcasting 3D.
If yes, check if your 3D system is correctly
emitting IR. Than make sure the EDGE™
Universal glasses are facing the IR emitter.
Please check if you have the lastest
software version (part 5 of this user guide).
If, the problem persists please ask the IR
compatibility to [email protected].
When this phenomenon occurs, it means
that the battery is low. Please recharge
the glasses.
Try recharging your glasses. If the problem
persists, contact [email protected]
My glasses are not displaying
3D.
PROBLEM
The glasses are blinking strongly.
The glasses blink when I turn
them ON.
The EDGE
™ RF glasses stay OFF.
7. TROUBLESHOOTING
The same problem continue.
My glasses are still not
displaying 3D.
- Steady light: charging.
- Off: charging is complete.
It is also possible to see the exact level of your glasses' battery
charge by connecting to your computer and using the Volfoni
Loader (see section Advanced settings via Volfoni Loader).
Once the glasses are recognized,the level bar is displayed.
6. VOLFONI LOADER - PARAMETERS
You can access to this part by clicking on “parameter” in the
menu “edit”
3D Switch :
- 3D on all positions : In this configuration the glasses will receive a
normal 3d sync whatever the switch position
- 3D Reverse : In this configuration the glasses will receive a
reverse 3d sync whatever the switch position
- Shared screen : In this configuration
Switch in A position : 3D
Switch in B position : 2D left
Switch in C position : 2D right
Dark Time : allows you to change the value of DarkTime
The slider allows you to adjust the value between -4000 microsec-
onds (better luminosity) and 4000 microseconds (better contrast).
The value applied is inscribed above the slider (0 in this example)
Moves Detection :
Enables or disables the Auto OFF feature when glasses are not
moving
Enabled: The glasses turn OFF automatically if no movement is
detected after 5 minutes (AUTO OFF enabled).
Disabled: The glasses will stay on even if no motion is detected.
(AUTO OFF function disabled).
Advanced :
- Delta Sync (µs) : Modify the sync offset (between -2000 and 2000
microseconds). Default = 0.
You must be in “Bootloader Mode” so that the EDGE™ Universal is recognized
by the software.
To do this, once the USB/µUSB cable is connected to the computer, press and
hold the ON/OFF button for 3 seconds.
