Volfoni Edge RF VPEG-03210, Руководство пользователя

Страница: 8 / 19

14 15
8. IMPORTANT SAFETY
RECOMMENDATIONS
-If you are unsure about your vision, take a test to verify
your ability to see stereoscopic 3D images.
-Do not sit too close to the screen when watching 3D
images.
-Watching 3D may cause discomfort (such as eye
strain, altered vision, fatigue, nausea, lightheadedness,
dizziness, confusion, loss of awareness, convulsions,
cramps and/or disorientation) for some people.
Volfoni recommends that you take regular breaks when
watching 3D content or playing 3D video games until
the discomfort ends. If the discomfort persists, consult a
doctor.
-Certain types of TV images or video games that contain
flashing patterns of light may cause epilepsy symptoms
for some viewers. If you or any member of your family
has a history of epilepsy, Volfoni strongly recommends
that you consult a physician before the use of this
product.
-Be aware of young children, especially those under six
years old. Because their vision is still under development,
consult a doctor (such as a pediatrician or eye doctor)
before allowing young children to watch 3D. Not for
children’s use without proper adult supervision.
-If the product is broken, please keep broken pieces
away from mouth and eyes. Dispose of pieces
responsibly.
-Protect the 3D system from direct sunlight, heat, or
7. TROUBLESHOOTING
PROBLEM SOLUTION
The RF signal is not
recognized.
Check that your ActivHub
TM
is emitting RF. The blue LED
on the side of the ActivHub
TM
RF will flash 2 times quickly to
indicate that it is emitting RF.
The glasses are blinking
strongly.
Check that there is no other
source using the same RF
channel within a range
of 30 meters around the
ActivHub
TM
RF.
The glasses blink when
I turn them ON
When this phenomenon
occurs, it means that
the battery is low. Please
recharge the glasses.
The EDGE™ RF glasses
are not synchronizing
with the ActivHub
TM
RF50
Verify that the RF channel
selected under the
ActivHub
TM
RF is set to
position “8”. Check that
your original source is
broadcasting 3D.
The EDGE™ RF glasses
stay OFF despite the
fact that I press the
ON/OFF button to turn
them ON
Try recharging your glasses.
If the problem persists,
contact support@volfoni.
com