1. GLASSES
The VOLFONI Active 3D Glasses use fast-response liquid crystal lenses to create
the best image quality. It is the brightest and most cost-saving 3D solution currently
on the market.
IR CAPTOR
keep it clean
for optimal
efficiency
Low power consumption
(battery lasts up to 800 hours)
Rubber nosepiece
Stylish and rugged
Unbeatable receiving angle
Automatic ON/OFF
Standard size, replaceable battery
LITHIUM
BATTERY
BATTERY AREA
battery tray
NOSEPIECE
Adaptively synchronizing
Optimal circuit layout
CE certified
USE AND SETUP
Note: Please, make sure that there is no
obstacle in front of the IR captor during
3D projection.
The 3D glasses do not need any setup to start. It is nevertheless necessary to check
all settings and connections of the 3D digital cinema system before projection. When
started, the lenses need 2 seconds to warm up and turn into working mode. Then the
lenses appear clear. When the 3D projection is finished or turned into 2D, the lenses will
remain clear for about 5 minutes. They will go directly into operation mode again
when a new signal is received.
ARMS
The glasses come with L size arms, and M & S size arms are available upon request.
For easy removal, just push in the new arms until you hear the "click".
M size
+
