background image

Supplied By www.heating spares.co  Tel. 0161 620 6677

8

Mynute

VOKERA PROGRAMMERS

5.2

SETTING THE DIGITAL CLOCK
The Vokera digital time clock will automatically
switch your boiler on and off.  It has a total of
twenty different switching commands, consisting
of ten ‘on’ commands and ten ‘off’ commands.
Each ‘on’ or ‘off’ command can be used to switch
the boiler ‘on’ or ‘off’ at the same time:

 

Every day of the week

 Monday to Saturday

 Monday to Friday

 Saturday and Sunday

 Any particular day

Example

Group of days

On

Off

Commands

used

Mon. to Fri.

06.00

09.00

2

Mon. to Fri.

16.00

21.00

2

Sat. & Sun.

08.30

10.30

2

Sat. & Sun.

17.00

23.00

2

Total

8 used

Commands ‘free’

12 unused

5.2.1

BEFORE PROGRAMMING
Gently press and release the ‘Res.’ button with a
pencil or similar, this will clear the memory of all
information.  This should only be done when you
want to change or insert a complete new pro-
gramme.

5.2.2

SETTING THE TIME OF DAY
The ‘real time’ clock has to be set to the actual
day of the week and time of day, to do this:

Press and hold the 

 button (see fig 2).

Press the ‘Day’ button until the actual day
shows in the display (1= Monday, 2= Tuesday,
3= Wednesday, etc.).

If setting the clock during ‘British summertime’
press the ‘+/-1h’ button once (use a pencil or
similar).

Press the ‘h’ button until the actual hour is
shown in the display.

Press the ‘m’ button until the actual minutes
are showing in the display.

Now release the 

 button.

The ‘:’ symbol between the hours and minutes
display will start to flash, this indicates that the
clock is now keeping time (see fig. 3).

Fig. 1

Fig. 2

Fig. 3

5.2.3

ENTERING 

 (on) COMMANDS

Repeatedly press the Prog. Button until the —
:— symbol appears in the clock display (see
fig. 4).

Press the Day button until the desired group of
days or desired day is shown.

Press the ‘h’ button until the desired hour for
switching the boiler on is shown.

Press the ‘m’ button until the desired minutes
are shown.

Press the Select button until the 

 symbol is

shown (see fig. 5).

Press the 

 button.

Fig. 4

Fig. 5

5.2.4

ENTERING 

 (off) COMMANDS

Repeatedly press the Prog. Button until the —
:— symbol appears in the clock display (fig. 4).

Press the Day button until the desired group of
days or desired day is shown.

Press the ‘h’ button until the desired hour for
switching the boiler off is shown.

Press the ‘m’ button until the desired minutes
are shown.

Press the Select button until the 

 symbol is

shown (see fig. 6).

Press the 

 button.

Содержание Mynute 20e

















Отзывы: