Instruction Manual
Voith Turbo
I/H Converter DSG-BXX112
I/H Converter DSG-BXX102
09 / 03 cet - Ochs/ZAN1
Voith Turbo GmbH & Co, KG
Page: 7 / 21
3.626 - 018877 en
D – 74564 Crailsheim
·
Failure of electric power or disturbance of the control electronics
integrated in the I/H converter may cause strong variations of the
output pressure when operating the I/H converter. Thus e.g. the
piston rod of a hydraulic cylinder may move uncontrolled, causing
danger to individuals or equipment.
·
During operation, the outer surfaces of the I/H converter may heat up
due to the pressure fluid. Contact may cause skin burns. Make sure to
cool down the I/H converter prior to working on it.
·
Electrical components are installed in the I/H converter. These
components can be destroyed by e.g. welding in its surrounding.
Therefore make sure to disconnect all electric connections prior to
electrical weldings in the surrounding of the I/H converter.
Environment protection
·
During mounting, dismounting or improper use of the I/H converter
pressure fluid may leak out. Operating agent reaching the sewage
system or the open soil, causes severe environmental damages.
Leaking pressure fluid has to be collected and deposited in
accordance with the national legal regulations.
Instruction manual
·
The instruction manual contains important information for proper
handling of the I/H converter. Prior to installation and commissioning
of the I/H converter, read the manual carefully and make sure it is
completely understood.
·
Keep this manual in a location convenient to the operating staff.
·
In addition to this operating manual: Have the relevant regulations for
prevention of accidents and environmental protection available and
observe these.
