Void Venu 210i, Руководство пользователя

Страница: 14 / 26

Venu 210i User Guide V1.0 Page 14
6.4 LED chart
Clip/temp LED
Colour Solid on Action required
Off Temperature OK, no clipping No action required
Yellow High amplifier temperature Reduce system gain
Red Output signal clipping Reduce system gain
Signal LED
Colour Solid on Action required
Green Input signal present, output not in limit No action required
Yellow Output limiter engaging Reduce system gain
Red Input signal clipping Reduce input gain
Status LED
Colour Solid ON
Off System off
Green System ready to play
6.2 Factory presets
Factory presets for the Venu 210i are as follows:
Preset 1 Air 8
Preset 2 Cyclone 55
Preset 3 Indigo 6S
Preset 4 Venu 6
6.3 Selecting your preset
To change your Venu 210i preset:
1. Apply power to the amplifier
2. Wait 15 seconds for the amplifier to initialize
3. Press the preset button
4. The next selected preset light will begin flashing
5. When the preset LED stops flashing and becomes steady the amplifier is ready to use in
that preset mode.
For alternative compatible loudspeaker presets please contact your Void representative.
6 Venu 210i DSP