Void Stasys 2 Скачать руководство пользователя страница 5

Stasys 4 User Guide V1.0

Page 5

Limited warranty

The warranty

For a period of three (3) years from the date of 
delivery to the original purchaser (as shown on the 
original invoice or sales receipt; a copy of this may be 
required as proof of warranty dates), Void Acoustics 
Research Ltd (hereinafter ‘Void’) warrants to the 
Original Owner (person or company who originally 
purchased the product brand new from either Void 
or a Void Authorised Dealer/Distributor) of each new 
Stasys Series product (provided it was purchased at 
an Authorised Void Dealer) that it is free of defects 
in materials and workmanship and that each 
product will meet or exceed all factory published 
specifications for each respective model. Void agrees 
to repair or replace (at its discretion) all defective 
parts at no charge for labour or materials; subject to 
following provisions:

Warranty violations

Void shall take no responsibility for repair or 
replacement as specified under this warranty, if 
the damaged product has been subject to misuse, 
accident, neglect or failure to comply with normal 
maintenance procedures; or if the serial number 
has been defaced, altered or removed. Nor will Void 
accept responsibility for, or resulting from, improper 
alterations or unauthorised parts or repairs. This 
warranty does not cover any damage to speakers 
or any other consequential damage resulting from 
breach of any written or implied warranty.

Void warranty provisions

Void will remedy any defect, regardless of the 
reason for failure (except as excluded) by repair, or 
replacement. Void will remedy the defect and ship 
the product within a reasonable time after receipt of 
the defective product at a Void Authorised Service Centre.

To obtain warranty service

If a Void product requires service, the Owner must 
contact Void or an Authorised Void Service Centre to 
receive an R.A.N. (Return Authorisation Number) and 
instructions on how to return the product to the Void 
Authorised Service Centre, or to Void. 

Void (or its Authorised Service Centre) will initiate 
corrective repairs upon receipt of the returned 
product. Please save the original carton and all the 
packing materials in case shipping is required. All 
products being returned to the factory or service 
centre for repairs must be shipped prepaid.

If the repairs made by Void or the Void Authorised 
Service Centre are not satisfactory, the Owner 
is instructed to give written notice to Void. If the 
defect or malfunction remains after a reasonable 
number of attempts by Void to remedy the defect 
or malfunction, the Original Owner shall then have 
the option to elect either a refund or replacement of 
said Void product free of charge. The refund shall be 
an amount equal to but not greater than the actual 
purchase price, not including any taxes, interest, 
insurance, closing costs and other finance charges 
(minus reasonable depreciation on the product).
If a refund is necessary, the Original Owner must 
make the defective or malfunctioning product 
available to Void free and clear of all liens or other 
restrictions.

Equipment modifications

Technical and design specifications are subject to 
change without notice.

Void reserves the right to modify or change 
equipment (in whole or part) at any time prior to 
delivery thereof, in order to include therein electrical 
or mechanical improvements deemed appropriate 
by Void, but without incurring any liability to modify 
or change any equipment previously delivered, or 
to supply new equipment in accordance with any 
earlier specifications.

Disclaimer of consequential and incidental 

damages

You, the Original Owner, are not entitled to recover 
from Void any incidental damages resulting from any 
defect in the Void product.

This includes any damage to another product or 
products resulting from such a defect.

Warranty alterations

No person has the authority to enlarge, amend, or 
modify this Warranty. This Warranty is not extended 
by the length of time which the Original Owner 
is deprived of the use of product. Repairs and 
replacement parts provided pursuant to the Warranty 
shall carry only the non-expired portion of the 
Warranty.

This Statement of Warranty supersedes all 

others contained in this user guide.

2 Limited warranty

Содержание Stasys 2

























Отзывы: