12 Local presets
All Bias Series amplifiers have an on board memory capable
of storing up to 50 presets.
An amplifier preset is a snapshot of the current amplifier
status, including the basic amplifier settings and the DSP
board settings if a DSP board is present.
12.1 Local preset: Locked presets
When the “locked presets” function is active, a number of
presets, determined by the “Locked bank size” menu, is not
overwritable. This function’s status can be toggled on/off by
entering the Lock code.
If a wrong code is entered, the system simply returns to the
previous local presets menu.
The preset name can be edited one character at a time.
12.4.2 Overwriting an existing preset
If the preset location is not empty, the amplifier will ask the
user confirmation to overwrite the file.
Note that if you have already input a preset name, or if you
have loaded a preset from local memory or a SmartCard,
the name is used as starting point for a new save preset
operation.
12.5 Local preset: Change lock code
In order to change the lock code used to activate the “Lock
presets” function, the old user code must be entered.
If the entered code is incorrect, the system returns to the
previous screen. There is no limit on the number of times
that an incorrect lock code can be entered.
12.2 Local preset: Locked bank size
This menu allows the user to set the number of locally stored
presets that cannot be overwritten. Either all (50) or none (0)
of the presets can be locked. After entering the correct lock
code, select the number of presets to be write protected.
12.3 Local preset: Recall local preset
In order to recall one of the 50 locally stored presets, press
ok when the “Recall local preset” line is highlighted.
Navigate forwards or backwards in the existing presets list:
press the right most button labelled “ok” to load the desired
preset. If a preset location is not used, it is labelled <empty>.
12.4 Local preset:Save local preset
12.4.1Save to an empty slot
To save the current amplifier setup as a preset to the lo-
cal memory, enter the “Save local preset” menu. Select an
empty preset location, press “ok”, and define a proper name.
If no other preset has been loaded in the amplifier either via
remote control or using a SmartCard, by default the cur-
rent preset name will be “PRESET” followed by the selected
memory slot name.
12.6 Local preset: Erase all presets
This function allows to erase all non write protected presets
in the amplifier’s internal memory. After having selected this
function’s submenu by pressing “ok”, a confirmation screen
will appear.
Pressing “ok” will erase all non protected presets; when all
non write protected presets have been erased, a screen
confirming this will appear.
Lock code
000000
ok
sel
-
+
FIGURE 48: Lock code.
ABCDEFGHIJKLMNOPQRST
UVWXYZ !"#$%&'()*+,-
./0123456789:;<=>?@
FIGURE 49: The “+” and “-” buttons allow
to navigate within a standard set of capital
letters and basic punctuation marks
Bias Series User Guide V1.0
Page 33
Содержание Bias V3
