Void AIRTEN, Руководство пользователя

Страница: 3 / 8

Air
Page 3
Reference Manual
Features
Close tolerance and durable components provide increased reliability and greater output.
High power internal crossover for easy of setup.
Low resonance Carbon/kevlar reinforced construction.
Built in Electronic protection device for the HF driver.
Rotatable HF horn allows both vertical and horizontal mounting.
Internal Powerdrive type 75 wall bracket mounting plate.
Flat frequency response for unparalleled sound quality.
Controlled dispersion angles provide greater direct to reflected sound.
Three year warranty and guarantee.
System Connections
Pin 1+ is and pin 1- is signal - Pins 2+ and 2- are not used.
Airten's speakon connectors are wired in parallel, so either speakon can be used as the input.
The other speakon can be used as a link output.
A positive signal to the + pin gives a forward cone movement on the Airten.
Notes
Airten features a rotatable HF horn that allows the cabinet to be used in either vertical or horizontal
positions. To change the dispersion first undo the 4 bolts that hold the left hand horn assembly in place.
(Left hand side when the 4 mounting bolts are facing downwards). Remove the horn assembly and undo
the 4 bolts that hold the HF horn in place. Rotate the HF horn by 90 degrees and replace the bolts that
hold it in place. Re attach the horn assembly and tighten the 4 bolts that hold it in place.
The HF horn is factory aligned for horizontal cabinet positioning.
Precautions
Please consider the following precautions during use :
1. Install the Airten enclosure in a dry environment, do not expose the cabinet to rain or moisture.
2. When flying or mounting an Airten ensure safe working practices and follow the recommended
rigging guidelines.
3. The Airten enclosure contains very powerful magnets. Do not locate an enclosure near any
sensitive equipment such as: VDU monitors, CRT TV's or high gain preamplifiers.