Appendix C: Title Line Messages
Message
Meaning
NOT RECOGNIZED
Spoken phrase was not recognized as valid
command or eligible waypoint.
INVALID ON
AIRWAY
VFS101 is expecting exit waypoint for
airway.
INVALID SELECTION
Selection of waypoints within departure and
arrival procedures is not supported.
INVALID EDIT
Active navigation leg may not be modified
and waypoints in departure and arrival
procedures may not be individually erased.
NOT WITH
SELECTION
DIRECT-TO is not valid while waypoint is
selected.
VAS WAS
RELEASED !
VAS was released before Direct-To
confirmation could be requested.
NO PRIOR
WAYPOINT
When a waypoint is selected, airway entry
begins with (and requires) preceding
waypoint.
SELECTION
REQUIRED
ERASE REMAINDER command requires a
previously selected waypoint.
TOO MANY
WAYPOINTS
Garmin GPS flightplan is full (31 or 100
waypoints).
Message
Meaning
NO DOUBLE
CLICK !
Direct-To waypoint, START NEW
FLIGHTPLAN, or ERASE REMAINDER
command was not confirmed by prompt
double-click of VAS.
- WAITING TOO
LONG -
VAS depressed for 20 seconds without
successful recognition. Release VAS before
continuing.
NO GPS POS DATA
VFS101 is not receiving valid position data
from the GPS. Check satellite signal
reception.
* VFS101
SHUTDOWN *
Five successive attempts without any
successful recognition. VFS101 operations
terminated until the VFS101 is restarted by
cycling the power.
CALIBRATION
ERROR
The VFS101 was unable to insert a
requested waypoint due to a calibration
error. Examine recent entries and update via
manual entry.
WAYPOINT NOT
FOUND
The requested waypoint could not be
located in the VFS101 internal navigation
database.
Page 24 / 25
