Page 12 of 14
Manual Modular-10 - 2018-07 EN
Mounting the tilting and swivelling wall bracket (B)
1. When mounting the bracket to the wall, follow the manufactu-
rer‘s operating instructions.
2. Remove the swivel bracket on the wall bracket.
3. Use two M6 x 15 mm threaded screws and washers to fix the
swivel bracket to the two M6 threaded points (A) on the rear of
the loudspeaker.
4. Hang the swivel bracket (with mounted speaker) into the bra-
cket attached to the wall.
5. Screw parts together using the lower carriage bolt, washer and
lock nut.
6.
Adjust and fix the tilt.
Mounting on box wall or traverse holder
1. When mounting the brackets on the wall (C) or truss (D), fol-
low the manufacturer‘s operating instructions.
2. Place the loudspeaker with the tilting pole socket on the wall-
and truss holder.
3.
Adjust the inclination with the tilting pole socket.
Note: The tilting pole socket snaps into place by the weight of
the loudspeaker. If you want to adjust the tilt, you have to raise
the loudspeaker slightly.
Mounting the ceiling bracket (E)
1. When mounting the ceiling plate of the bracket, follow the ma-
nufacturer‘s operating instructions.
2. Fix the ceiling mount with two M6 x 15 mm threaded screws
and washers to the two M6 threaded points (A) on the back of
the speaker.
3.
Attach ceiling bracket (with mounted loudspeaker) to the cei-
ling panel.
4.
Adjusting and fixing tilt and direction.
Monitoring with Modular-10
Two monitoring angles, 50° and 20°, are available for monitor
operation with the Modular-10. The SpeakON
®
connectors at the
top and bottom of the loudspeaker are ideal for easy connection in
monitor mode.
Working with Modular-10
50°
20°
E
A
B
C
D
