Vogue F993, Руководство по сборке

Страница: 4 / 16

1
UK
Telephone Helpline : 0845 146 2887 (United Kingdom)
Safety Tips
Whilst all care has been taken to remove sharp edges, care must be taken when cleaning or handling the
trolley to prevent risk of injury from exposed metal edges.
Product Description
Assembly
To attach the shelves to the frames:
1.
Remove all protective film from the parts, taking care to avoid scratching the surfaces.
2.
Place a support pad inside the corner of the shelf.
3.
Position the shelf against the screw hole in the frame.
4.
Slide a hexagon screw through the frame and the support pad so the screw thread protrudes from the
inside
[A].
5.
Slot a washer over the protruding end of the screw and then attach a hexagon nut. Tighten slightly.
6.
Attach the other corner to the frame in the same way.
7.
Repeat for the other shelves, attaching just one end of the shelf to the frame.
8.
Attach the second frame to the other end of the shelves.
9.
Slide the castor covers over the frame legs and screw the castors on to the frame [B] .
Cleaning
• Clean the trolley regularly using a cleaning agent suitable for use with stainless steel.
• Always remove cleaning agent residue. This can discolour the surface of the trolley.
• Never leave the trolley surface damp as this can cause discolouration.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE.
Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the
right to change specifications without notice.
Note: Be sure to check all packaging materials for any small parts that may have come
loose during transportation.
Note: The shelves may appear twisted. This is normal and the shelves straighten out
during the assembly process.
Note: To allow for later adjustment do not tighten the nut fully until all corners are
attached to the frames.
Note: Ensure that the two castors with brakes are not fitted to the same end of the trolley.
• F993 - 3-Tier 710(l) x 405(b) x 810(d) mm
• F994 - 3-Tier 810(l) x 455(b) x 855(d) mm
• F995 - 3-Tier 860(l) x 535(b) x 930(d) mm
• F996 - 2-Tier 710(l) x 405(b) x 810(d) mm
• F997 - 2-Tier 810(l) x 455(b) x 855(d) mm
• F998 - 2-Tier 860(l) x 535(b) x 930(d) mm