D312I VoIP User Manual V1.0
muted status, the
【
USE LED
】
will blink, Press again the phone will resume to normal,
and
【
USE LED
】
will also stop blink and resume to always on status.
Reset IVR
Pick up handset or press
【
SPEAKER
】
button, then press button
【
AUTO
】
and
【
*
】
,
telephone will enter into the RESET IVR menu, you will hear “enter pin”, Input the default
reset pin “00000000”,then telephone will reboot
.
Make a call
Normal Call
Pick up handset or press
【
SPEAKER
】
button, then dial the desired numbers.
One Key Speed Dial Call
Pick up handset or press
【
SPEAKER
】
button, then press
【
M1 | M2 | M3
】
to quickly
call the stored user.
Two Key Speed Dial Call
Pick up handset or press
【
SPEAKER
】
button, then press
【
AUTO
】
and
【
0~9
】
to
quickly call the stored user.
Direct IP Call
Pick up handset or press
【
SPEAKER
】
button, then dial desired IP address.
Note
: star
【
*
】
key as the point.
For example:
the IP address is 192.168.0.8, off hook dial 192*168*0*8 and dial
【
#
】
to send it or wait a moment it send automatic.
Transfer Call
For the call transfer, we use three phones to demo the operation; all these phones
register to the same server. (Phone A: D312I, phone B, C: also D312I or other IP phone)
Blind Transfer
IP phone A Call B, B answer the call, after this, phone A press
【
FLASH
】
button, then
B is held, and A get another dial tone, A input the number of C, and press
【
AUTO
】
button,
C will ring and A get the busy tone, by now, the blind transfer is successful.
Half Attend Transfer
IP phone A Call B, B answer the call, after this, A press
【
FLASH
】
button, then B is
held, and A get another dial tone, A input the number of Phone C and then dial
【
#
】
to send
the number or wait for the timeout the number will be send automatic, after this , A get the
ring back tone , C is ringing , at this time C do not answer and A press
【
AUTO
】
button.
A get busy tone and exit the call session, by now the Half Attend Transfer is successful.
Attend Transfer
IP phone A Call B, B answer the call, after this, A press
【
FLASH
】
button, then B is
held, and A get another dial tone, A input the number of Phone C and then dial
【
#
】
to send
the number or wait for the timeout the number will be send automatic, after this, A get the
ring back tone, C is ringing , at this time C answer the call and A press
【
AUTO
】
button. A
get busy tone and exit the call session, by now they Attend Transfer is successful.
Configuring the D312I using a web browser
Содержание D312I
Страница 4: ...D312I VoIP User Manual V1 0 ...