Vogt SSD Series, Руководство по обслуживанию, Страница: 4 / 21

4
2. 1 Inspection
Inspect pump upon receipt for shipping damage and that all components are in the received assembly.
2.2 Storage Procedures and Recommendations
To store the pump:
• VOGT recommends indoor storage. Exposed seals may age for a considerable time. Protect pumps from heat and
exposure to solar radiation (ozone) or environmental contamination.
• If stored outdoors, protect equipment from temperature extremes, humidity, exposure to dust, moisture and vibration.
For outdoor or excessively unfavorable environments, including dust and rain, cover the equipment with some type of
protective sheeting to allow air circulation.
• Rotate the pump shaft at least 10 revolutions once a week.
• Keep discharge flange covers on during storage. Removal of the protective covers may allow foreign material, water or
substances harmful to the pump to enter and damage and/or crack the components.
• All external machined surfaces are factory coated with a rust inhibitor prior to shipment. Maintain protective coating on
machined surfaces.
• Maintain written records of shaft rotation intervals when storage period exceeds six months from time of shipment.
Records should be available for inspection by VOGT personnel.
• Maintain the oil level at the maximum level in the oil chamber.
• Rotate the shaft 10 turns once a week. If pumps are stored for more than 18 months from time of shipment, records
must be kept of the above storage activities to maintain all warranty provisions as agreed with VOGT.
• These provisions apply only to components and/or equipment owned by VOGT.
Inspection and
Storage
Inspection and Storage