2
This document is property of Vogel’s Products BV
Any distribution, reproduction, copying or publication of this document is prohibited.
Thank you for purchasing the new Projector Lift.
The PPL 2500 is supplied with a set of components and accessories that make it suitable for installation
for the majority of standard AV applications, but note must be made of the restrictions that apply to the
weight capability of this unit and not exceeded.
Before installing the lift, please read the following instructions carefully.
Please, always keep these instructions so that anyone can read them when needed.
The manufacturer does not takes responsibility for any damage to property or personal injury if the
projector lift is used outside or recommended specifications or in case of incorrect installation.
INSTALLATION OF PPL 2500 PROJECTOR LIFT HAS TO BE CARRIED OUT FROM QUALIFIED PERSONNEL
ONLY
.
Before installing the projector lift, please read the following instructions carefully:
The projector lift must be used indoors only.
It is forbidden to stay under the lift and within a range of 3 meter from the lift.
Never connect more than one lift motor to the same switcher. Use the supplied switcher only.
In case of maintenance, unplug the power supply.
Please confirm that your projected image width will fit your screen from your proposed
mounting location prior to installation.
Incorrect use of the lift, including exceeding the maximum lifting weight, will be dangerous .
The manufacturer does not take responsibility for any damage or property or personal injury if
the lift is used outside of recommended specifications.
This product uses a 230V AC Motor. Do not attempt to service the motor. Incorrect servicing
could lead to risk of electric shock.
For any repairing, please contact directly the dealer you purchased the unit from.
Check at least once a year that the screws of the steel cables are well tightened and that the
steel cables are in good conditions. In case they have signs of usage or damages, replace them
promptly with the original ones supplied by the manufacturer.
Check every 6 months that screws, wall plugs and brackets are in good conditions and well
tightened.
M
O
U
IN
_P
PL
25
00
_V
3
