Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW 6885
www.vogels.com
PFW 6885 dedicated flat-panel spacers are engineered with the knowledge
that aligning each flat-panel on a large wall is time consuming and costly.
These model-specific spacers
are available for most flat-panels, which
significantly reduces the installation time. (Call Customer Service to inquire
about model specific spacers.)
Installing OPTIONAL Model Specific Spacers
Multiple PFW 6885 mounts can be installed using model specific spacers.
Simply repeat step one when installing each of the surrounding PFW 6885
mounts. Use one spacer for each 2x2 installation by mounting it to the wall,
or utilize the same spacer as many times needed to complete an unlimited
PFW 6885 large matrix video wall.
1.
Make sure the spacer is plumb and level and mark each corner where
the PFW 6885 will be mounted (or secure to the wall). It is best to start
from the bottom corner and work your way up.
2.
Install the second mount working in a horizontal direction.
3.
Ensure that the mount remains plumb and level.
4.
Repeat this step for each mount horizontally
5.
To install multiple rows, place spacer between previously installed PFW
6885 on the bottom row. Make sure the spacer is plumb and level, mark
the corners (or secure to the wall) to be sure of where the PFW 6885
should be and secure your mount to the wall.
This spacer is shown for illustration purposes only. Your spacer may
look different depending on the display model you are installing.
1)
Once your PFW 6885 is mounted in the desired location and
is level, align your spacer to the top left or right (depending on
your install direction) corner register tabs of your mount.
You may use commercially available hardware to secure the
spacer to the wall during installation (depending on the wall material).
You may utilize the same spacer for multiple PFW 6885 installations.
Start
Page 6
12
13
13