background image

Programming

11

Programming

The Tone/Pulse & Flash Timing settings may be changed by moving their
respective “recessed” switches located at the top of a 2800-telephone.

Tone/Pulse

Move the switch to the desired position: “T” or “P”

Flash Timing

Slide the switch to one of these settings: 100, 300, or 600 ms

Troubleshooting Guide

If this telephone  does not work properly, try the following suggestions.

Condition

Suggestion

No Dial Tone

»  Check all  cables to make sure that all  connections

are secure and not damaged.

»  Check the hookswitch. Does it fully extend when the

handset is lifted from the cradle?

»  Check to make sure the tel ephone i s not on Hol d.
»  Unplug the  telephone and connec t it to another

modul ar jack. If it still  does not work, and  other
telephones in your home are working, the problem
is with this telephone.

Telephone does not
dial out

Check the dial mode in the prog ramming area.
Is i t set to tone, which may not b e compatible with your
local dial ing service?

Telephone does not 
ring

Are you using too many telephones on one l ine?
The  total  REN of al l telephones  on the  same line should
not be greater than the maximum REN for your calling
area. (

Refer to the  FCC Registration Information

.)

Incoming and 
outgoing voi ce 
volume is low

Are other telephones off hook at the same time?
If so, this is a normal condi tion. The volume level drops
when additional  telep hones are used at the same ti me.

Speakerphone
does not work

If  the  other person  cannot hear you, make sure the
MUTE li ght i s off.

Difficulty storing 
numbers in memory

Make sure you  are  pressing  the correct sequence of
buttons for storing memory.

Содержание STARPLUS 2800 Series





















Отзывы: