Note: This shower has a WELs certified flow regulator fitted to the handpiece (see diagram 5). If you want a greater
flow, remove this disc but note that this will not give a WELS 3-star water rating anymore.
WARRANTY
PLEASE CALL US BEFORE REMOVING SLIDE SHOWER OR UNDERTAKING ANY REPAIR WORK.
Please refer to our website for warranty information:
www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
SHOULD NOT BE CLEANED WITH ACIDIC, CAUSTIC/ALKALINE, ABRASIVE OR CITRIC CLEANERS.
A soft, damp cloth is recommended for cleaning (Not a Micro fibre cloth). Mild soap solutions can also be used on
occasion.
Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
ATTACH PROOF OF PURCHASE HERE
596mm
2
8L/min Flow Regulator
Black O-ring
Water Flow
**Ensure the flow regulator is fitted
with the O-ring facing away from the
hose (as shown), between Shower
connection and Hose. This will comply
with the WELS rating.
Do NOT fit between handpiece and
hose as this can overpressurise the
hose and cause premature failure of
the shower hose.
4
2
1
3
5
Shower wall outlet hole
24mm diameter
8mm diameter hole
Apply teflon tape
Screw threaded
adapter to wall
outlet then
tighten firmly
with allen key
Position Shower Rail over wall inlet and wall adapter and
gently push into place, then fasten the rail by tightening the
top and bottom grub screws.
OVERHEAD ROSE
HANDPIECE
Rubber washer
6. Turn on water supply. Check for leaks.
Flow restrictor
Push plastic plug into drilled hole.
Position mounting adapter over the hole
and screw firmly into place.
580mm
to
630mm;
Adjustable
Top Bracket
